Able TL-Series Telescopic Swing Gate Motors | Up to 4 m | Qatar
Able TL-Series Telescopic Swing Gate Motors | Up to 4 m | Qatar
Product identity
Able TL-Series Telescopic Swing Gate Motors are irreversible electromechanical telescopic actuators for swing gates. This range covers verified 230V AC models for leaves up to 2.5 m, 3 m, or 4 m, with model-specific selection curves. The Able TL-Series Telescopic Swing Gate Motors are listed for Qatar installations.
Materials and construction
Construction materials are plastic, metal, and aluminium. Features include a telescopic arm, anti-wear gears, protected power-cable routing, and a manual-release system.
Models and specifications
- TL Small 400 230: 230V / 50 Hz; maximum leaf length 2.5 m; maximum leaf weight 400 kg subject to the Able leaf length/weight curve; IP44; operating temperature -30°C to +50°C; maximum electric power 250 W; full-load absorption 1.2 A; operating speed 0.016 m/s; maximum thrust 2300 N; 22 cycles/hour; maximum travel 400 mm.
- TL Medium 500 230: 230V / 50 Hz; maximum leaf length 3 m; maximum leaf weight 500 kg subject to the manufacturer selection curve; IP44; operating temperature -30°C to +50°C; 250 W; 1.2 A; operating speed 0.016 m/s; maximum thrust 2300 N; 17 cycles/hour; maximum travel 500 mm.
- TL Medium 600 230: 230V / 50 Hz; maximum leaf length 4 m; maximum leaf weight 600 kg subject to the manufacturer selection curve; IP44; operating temperature -30°C to +50°C; 250 W; 1.2 A; operating speed 0.016 m/s; maximum thrust 2300 N; 15 cycles/hour; maximum travel 600 mm.
Use cases and selection
These operators are intended for automating swing gates in Qatar, including gates with leaves up to 2.5 m, 3 m, or 4 m, subject to the relevant model’s selection curve. They may be considered for solid or privacy gates, but wind exposure and resulting loads must be assessed; gate weight alone does not determine suitability. Leaf length and weight, hinge condition, post geometry, opening angle, installation dimensions, and expected operating frequency should be checked before selecting a model. Required actuator travel depends on mounting arrangement and opening angle, so a longer-stroke model does not automatically suit an existing installation.
For a model-specific assessment or quotation, provide the leaf width and approximate weight, gate construction, hinge and post dimensions, site photos, location, and expected daily cycles. Compatible 230V control solutions include Able CX EV01 and CX FLEXY 433, depending on configuration. Photocells, transmitters/receivers, electric locks, and access devices are listed as safety and access-control options.
Included and exclusions
Remotes and brackets are included. The merchant lists “sansor” as an exclusion. Confirm the exact item and package contents when ordering.
Care and warranty
Correct a dragging gate leaf or worn hinge before fitting a new operator. Identify mechanical stops, control equipment, and protective devices; commission the system and provide a manual-release handover. Warranty: 2 years.




